Lutron Foundation Package Incandescent C.L Starter RR-FDN-CL-WH (White)

Foundation package, includes: 1 RadioRA2 remote dimmer, 1 RadioRA 2 main repeater, (3 ) RadioRa 2 600W dimmer, 1 RadioRA2 hybrid 6BRL wall keypadUnique Features – CL Dimmer:• Rated for: 600 W INC/HAL, 600 W MLV, 150 W approved LED/CFL• 2-wire dimmer, does not require a neutral• Minimum load of 10 watts requiredRadioRA 2 Maestro local controls function much like standard dimmers and switches, but can be controlled as part of a lighting control system. Local lighting controls are useful in locations where single circuits of lighting need to be dimmed or switched.RadioRA 2 Maestro dimmers incorporate advanced features such as fade on / fade off, delayed long fade to off, and rapid full on.RadioRA 2 Maestro local controls include a Front Accessible Service Switch (FASSTM) for safe lamp replacement. RadioRA 2 Maestro local controls install in single-pole or multi-location applications. Remote dimmers / switches are available for multi-location control.Use Lutron® Designer (Claro® or Satin Colors®) wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately. Lutron Claro and Satin Colors wallplates snap on with no visible means of attachment. RadioRA 2 Maestro local controls support color change kits.Features• On a single-tap, lights fade ON or OFF• On a double-tap, lights go to full ON• When ON, press and hold the tapswitch to engage the delayed long fade to OFF• Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached• Neutral and two-wire dimmers availableRadioRA® 2 Hybrid Keypads function as a dimmer and keypad combined into a single device. Hybrid Keypads are great for retro-fit applications since they eliminate the need to install two separate devices.RadioRA® 2 Hybrid Keypads have an available neutral wire terminal that allows them to be installed in either two-wire or neutral wire installations. Connecting the neutral wire to a Hybrid Keypad allows a lower minimum load to be used. Also, normal keypad operation will be available even if the attached load is not installed or if the lamp is burned out. If a neutral wire is available in the wallbox it should be connected to the silver teminal on the Hybrid Keypad. If a neutral wire is not available and not desired, then the silver terminal should be tightened without any wires connected to it. Hybrid Keypads can be installed in either single location or multi-location (with Remote Dimmer) installations.RadioRA® 2 Hybrid Keypads can be controlled as part of a lighting control system and incorporate advanced features such as fade on / fade off and rapid full on.RadioRA® 2 Hybrid Keypads feature large, easy-to-use buttons, plus a unique backlit engraving option that makes them readable any time of the day or night. The Hybrid Keypad buttons are rounded, allowing engraving to be displayed at an upward angle, increasing readability. RadioRA® 2 Hybrid Keypads include a Front Accessible Service Switch (FASS™) for safe lamp replacement.Use only Lutron® Designer (Claro® or Satin Colors®) wallplates. The mechanical design of the keypad is ONLY compatible with Lutron® wallplates and is NOT compatible with any other manufacturer’s wallplate. Wallplates are sold separately. Lutron® Claro® and Satin Colors® wallplates snap on with no visible means of attachment. Replacement Kits are available in a variety of colors and with custom engraving to identify clearly each button’s function.Features• Keypad buttons are programmable to select scene or room preset levels or positions• At the press of a keypad button, lights fade ON or OFF to desired levels and shades/draperies open or close to desired positions• Adjustable backlight intensity• Prepaid engraving included. Redeemable for one engraved Replacement Kit• Internal dimmer is assigned to top button by default. Tap top button to toggle load ON / OFF• Internal dimmer can be assigned to any button on the Hybrid Keypad and can be programmed to be controlled by any Keypad• Can be installed in two-wire or neutral wire applications• Can be installed in either single location or multi-location (with Remote Dimmer) installationsRadioRA® 2 Repeaters extend the range of Radio Frequency (RF) signals that are sent between devices. Repeaters ensure error-free communication between system components and prevent interference from neighboring systems.For systems that extend up to 30 ft (9 m), one (1) Main Repeater is required to set up the system. Up to four (4) Auxiliary Repeaters can be added to extend the RF range for larger system applications. Each Repeater has an RF range of 30 ft (9 m), covering a total area of approximately 2500 ft2 (232 m2).Features• Test button: enters the system diagnostic mode.• Can be programmed from a PC.• RS485 port to connect to other Repeaters through a wired link (daisy-chain).• Main Repeaters allow configuration and integration to the system through Ethernet or RS232 ports (see chart to the right).• System with 2 Main Repeaters must be connected via Ethernet.or systems that extend up to 30 ft (9 m), one (1) Main Repeater is required to set up the system. Up to four (4) Auxiliary Repeaters can be added to extend the RF range for larger system applications. Each Repeater has an RF range of 30 ft (9 m), covering a total area of approximately 2500 ft2 (232 m2).